Beurer GL Instrucciones de operaciones descargar pdf (Pagina 32)

Beurer GL32 mg/dL

Problem: Device does not turn on.

Cause Action

Flat batteries Replace the batteries.

Battery missing or incorrectly inserted Check whether the batteries are inserted

correctly (see "4.1 Inserting and replacing

the batteries", page 13).

Test strip was not fully inserted or

inserted on the wrong side

Insert the test strip, contacts first, into the

slit on the device. Ensure that the front

side of the test strip is facing towards you

(see "3.3 Test strip", page 11).

Device is defective Contact customer service.

Problem: The test does not start after you insert the test strip in the device and

apply blood.

Cause Action

Insufficient quantity of blood Repeat the test with a new test strip and

a larger blood droplet.

Test strip is defective Repeat the test using a new test strip.

Blood was applied while the device was

turned off

Repeat the test and apply the blood

when 6 is flashing.

The basic settings of the device have

been changed and the change was not

completed (see "4.2 Basic settings",

page 13).

Remove the lid of the battery compartment

and press the "SET" button repeatedly

until "OFF" is displayed. Close the battery

compartment and repeat the test.

Device is defective Contact customer service.

Note

If the problem persists, contact customer service.

1 2 ... 27 28 29 30 31 32 33 34 35 36

Sin comentarios

Beurer GL Instrucciones de operaciones Pagina 32